IMPORTANT NOTICE

Updated: 24-SEP-2003 (Use your browsers' Reload button to ensure you're viewing the most recent version)

To obtain this kit please call the Customer Support Centre or use the FTP site Search for this ECO kit and dependencies Search the Compaq FTP web site this kit (exact match) Search the Compaq FTP web site this or related ECOs

*OpenVMS] JVMS731_ECO-V0100 Japanese Alpha Alpha 7.3-1 ECO Summary

New Kit Date:       17-JAN-2003
Modification Date:  Not Applicable
Modification Type:  NEW KIT

Copyright (c) Compaq Computer Corporation 2002,2003.  All rights reserved.

OP/SYS:     OpenVMS Alpha

COMPONENT:  OpenVMS/Japanese Alpha

SOURCE:     Compaq Computer Corporation

ECO INFORMATION:

     ECO Kit Name: JVMS731_ECO-V0100
		   DEC-AXPVMS-JVMS731_ECO-V0100--4.PCSI
     ECO Kits Superseded by This ECO Kit:  None
     ECO Kit Approximate Size:  64 Blocks
     Kit Applies To:  OpenVMS Alpha V7.3-1
     System/Cluster Reboot Necessary:  Information Not Available
     Rolling Re-boot Supported:  Information Not Available
     Installation Rating: Install_2

		2 : To  be  installed  by   all  customers  using  the
		    following feature(s):

	        ODL for Gaiji (User Defined Characters)

     Kit Dependencies:

       The following remedial kit(s) must be installed BEFORE
       installation of this kit:

         None

       In order to receive all the corrections listed in this
       kit, the following remedial kits should also be installed:

         None

ECO KIT SUMMARY:

An ECO kit exists for Japanese Alpha on OpenVMS Alpha V7.3-1. This kit addresses the following
problems:

PROBLEMS ADDRESSED IN JVMS731_ECO-V0100 KIT

     o  When user shows the user defined characters on the Japanese
        terminal which supports on-demand loading for font data,
        OpenVMS may crash by the FHdriver (Font Handler).


          Images Affected:[SYS$LDR]JSY$FHDRIVER.EXE




RELATED ARTICLES:

Detailed articles describing the problems listed above may exist in
the Open OPENVMS. To view these articles, open the appropriate product database and perform a query using either of the following search strings: 'JVMS731_ECO-V0100' or 'JVMS731_ECO'


ECO KIT ORDERING INSTRUCTIONS:

If after an evaluation you wish to obtain this kit, request it
electronically using the appropriate Advanced Electronic Services
(AES) Service Tool.  If you are not familiar with how to request
kits electronically, open the DIA, WIS or DSNLINK database and
review the article entitled:

     [AES] How To Electronically Request ECO Kits Using Service Tools


INSTALLATION NOTES:

This kit requires a system reboot.  Compaq strongly recommends that
a reboot is performed immediately after kit installation to avoid
system instability

If you have other nodes in your OpenVMS cluster, they must also be
rebooted in order to make use of the new image(s).  If it is not
possible or convenient to reboot the entire cluster at this time, a
rolling re-boot may be performed.

Install this kit with the POLYCENTER Software installation utility
by logging into the SYSTEM account, and typing the following at the
DCL prompt:

 PRODUCT INSTALL JVMS731_ECO/SOURCE=<kit location>

The kit location may be a tape drive, CD, or a disk directory that
contains the kit.

Additional help on installing PCSI kits can be found by typing
HELP PRODUCT INSTALL at the system prompt


Special Installation Instructions:

     o  Scripting of Answers to Installation Questions

        During installation, this kit will ask and require user
        response to several questions.  If you wish to automate the
        installation of this kit and avoid having to provide responses
        to these questions, you must create a DCL command procedure
        that includes the following definitions and commands:

           -  $ DEFINE/SYS NO_ASK$BACKUP TRUE

           -  $ DEFINE/SYS NO_ASK$REBOOT TRUE

           -  Add the following qualifiers to the PRODUCT INSTALL
              command and add that command to the DCL procedure.

                /PROD=DEC/BASE=AXPVMS/VER=V1.0

           -  De-assign the logicals assigned

        For example, a sample command file to install the
        VMS731_EV7-V0100 kit would be:

          $
          $ DEFINE/SYS NO_ASK$BACKUP TRUE
          $ DEFINE/SYS NO_ASK$REBOOT TRUE
          $!
          $ PROD INSTALL VMS731_EV7/PROD=DEC/BASE=AXPVMS/VER=V1.0
          $!
          $ DEASSIGN/SYS NO_ASK$BACKUP
          $ DEASSIGN/SYS NO_ASK$REBOOT
          $!
          $ exit

All trademarks are the property of their respective owners.

  
  ==========================================================================
  |                     Table of Kit Image Information                     |
  +----------------------------+----------+-----------------+--------------+
  |                            | Overall  | Image File      | Image Link   |
  | Image Name                 | Checksum | Identification  | Date/Time    |
  +----------------------------+----------+-----------------+--------------+
  | JSY$FHDRIVER.EXE           | D4DB9E71 | V7.3-1TKT414231 | 3-DEC-2002   |
  |                                       |                 | 10:24:08.25  |
  +----------------------------+----------+-----------------+--------------+