Updated: 24-SEP-2003 (Use your browsers' Reload button to ensure you're viewing the most recent version)
VMS73_CPU2308-V0100 Alpha V7.3 CPU2308 ECO Summary
*OpenVMS] VMS73_CPU2308-V0100 Alpha V7.3 CPU2308 ECO Summary
Copyright (c) Compaq Computer Corporation 2002. All rights reserved.
OP/SYS: OpenVMS Alpha
COMPONENT: CPU2308
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: VMS73_CPU2308-V0100
DEC-AXPVMS-VMS73_CPU2308-V0100--4.PCSI
ECO Kits Superseded by This ECO Kit: None
ECO Kit Approximate Size: 336 Blocks
Kit Applies To: OpenVMS Alpha V7.3
System/Cluster Reboot Necessary: Yes
Rolling Re-boot Supported: Yes
Installation Rating: INSTALL_2
2 : To be installed by all customers using the following
feature(s):
GS-series systems
Note - This kit only applies to GS80, GS160 and
GS320 systems
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
VMS73_UPDATE-V0100
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for CPU2308 on OpenVMS Alpha V7.3. This kit addresses
the following problems:
PROBLEMS ADDRESSED IN VMS73_CPU2308-V0100 KIT
o When a 670 machine check (Processor Uncorrectable Error)
occurs, a System Error Frame Subpacket is erroneously appended
to the machine check frame in the error log file.
Images Affected:[SYS$LDR]SYS$CPU_ROUTINES_2308.EXE
o When a GS series system takes a 660 machine check crash, and a
galaxy remote machine check occurs when the node is rebooting
from the 660 machine check, the more useful machine check dump
is overwritten by the galaxy remote machine check dump.
Images Affected:[SYS$LDR]SYS$CPU_ROUTINES_2308.EXE
o Kernal Stack Not Valid Halt
Images Affected:[SYS$LDR]SYS$CPU_ROUTINES_2308.EXE
o After logging a DTAG error, the user may see recurring DTAG
hardware errors reported.
Images Affected:[SYS$LDR]SYS$CPU_ROUTINES_2308.EXE
RELATED ARTICLES:
Detailed articles describing the problems listed above may exist in
the OPENVMS database. To view these articles,open the appropriate
product database and perform a query using either of the following
search strings: 'VMS73_CPU2308-V0100' or 'VMS73_CPU2308'.
ECO KIT ORDERING INSTRUCTIONS:
If after an evaluation you wish to obtain this kit, request it
electronically using the appropriate Advanced Electronic Services
(AES) Service Tool. If you are not familiar with how to request
kits electronically, open the DIA, WIS or DSNLINK database and
review the article entitled:
[AES] How To Electronically Request ECO Kits Using Service Tools
INSTALLATION NOTES:
This kit requires a system reboot. Compaq strongly recommends that
a reboot is performed immediately after kit installation to avoid
system instability
If you have other nodes in your OpenVMS cluster, they must also be
rebooted in order to make use of the new image(s). If it is not
possible or convenient to reboot the entire cluster at this time, a
rolling re-boot may be performed.
INSTALLATION INSTRUCTIONS:
Install this kit with the POLYCENTER Software installation utility
by logging into the SYSTEM account, and typing the following at the
DCL prompt:
PRODUCT INSTALL VMS73_CPU2308 /SOURCE=[location of Kit]
The kit location may be a tape drive, CD, or a disk directory that
contains the kit.
Additional help on installing PCSI kits can be found by typing
HELP PRODUCT INSTALL at the system prompt
Special Installation Instructions:
o Scripting of Answers to Installation Questions
During installation, this kit will ask and require user
response to several questions. If you wish to automate the
installation of this kit and avoid having to provide responses
to these questions, you must create a DCL command procedure
that includes the following definitions and commands:
- $ DEFINE/SYS NO_ASK$BACKUP TRUE
- $ DEFINE/SYS NO_ASK$REBOOT TRUE
- Add the following qualifiers to the PRODUCT INSTALL
command and add that command to the DCL procedure.
/PROD=DEC/BASE=AXPVMS/VER=V1.0
- De-assign the logicals assigned
For example, a sample command file to install the
VMS73_CPU2308-V0100 kit would be:
$
$ DEFINE/SYS NO_ASK$BACKUP TRUE
$ DEFINE/SYS NO_ASK$REBOOT TRUE
$!
$ PROD INSTALL VMS73_CPU2308/PROD=DEC/BASE=AXPVMS/VER=V1.0
$!
$ DEASSIGN/SYS NO_ASK$BACKUP
$ DEASSIGN/SYS NO_ASK$REBOOT
$!
$ exit
All trademarks are the property of their respective owners.
==========================================================================
| Table of Kit Image Information |
+----------------------------+----------+-----------------+--------------+
| | Overall | Image File | Image Link |
| Image Name | Checksum | Identification | Date/Time |
+----------------------------+----------+-----------------+--------------+
| SYS$CPU_ROUTINES_2308.EXE | BA203B20 | X-1 | 6-SEP-2002 |
| | | 13:16:16.09 |
+----------------------------+----------+-----------------+--------------+
|
