Updated: 24-SEP-2003 (Use your browsers' Reload button to ensure you're viewing the most recent version)
VMS721_RENAME_OLD-V0200 Alpha V7.2-1 RENAME_OLD ECO Summary
*OpenVMS] VMS721_RENAME_OLD-V0200 Alpha V7.2-1 RENAME_OLD ECO Summary
New Kit Date: 15-AUG-2002
Modification Date: Not Applicable
Modification Type: NEW KIT
Copyright (c) Compaq Computer Corporation 2002. All rights reserved.
OP/SYS: OpenVMS Alpha
COMPONENT: RENAME_OLD
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: VMS721_RENAME_OLD-V0200
ECO Kits Superseded by This ECO Kit: VMS721_RENAME_OLD-V0100
ECO Kit Approximate Size: 80 Blocks
Kit Applies To: OpenVMS Alpha V7.2-1
System/Cluster Reboot Necessary: No
Rolling Re-boot Supported: Not Applicable
Installation Rating: INSTALL_1
1 - To be installed by all customers.
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for RENAME on OpenVMS Alpha V7.2-1.
This kit addresses the following problems:
PROBLEMS ADDRESSED IN VMS721_RENAME_OLD-V0200 KIT
o Additional problem entries have occurred in the
SYS$COMMON:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT file since
the VMS721_RENAME_OLD-V0100 kit was issued. This kit
includes corrections for these new entries. The complete
list of updated images is included in the next problem
description.
Images Affected:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT
o During an OpenVMS ECO kit installation, names of the
installed images are written to
SYS$COMMON:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT. Several
of these file names were written incorrectly by the
following remedial kits.
o DEC-AXPVMS-VMS721_DRIVER-V0200-4.PCSI
o DEC-AXPVMS-VMS721_MANAGE-V0100-4.PCSI
o DEC-AXPVMS-VMS721H1_VX1-V0200-4.PCSI
o DEC-AXPVMS-VMS721H1_CPU2308-V0100-4.PCSI
o DEC-AXPVMS-VMS721H1_ACRTL-V0200-4.PCSI (new)
o DEC-AXPVMS-VMS721_SYS-V1200--4.PCSI (new)
During an OpenVMS Version 7.3 upgrade, operating system
files from the previous version of OpenVMS are deleted.
Because of these file errors, files from the newly
installed system may be deleted. This may cause the
system to become un-bootable.
This kit will verify the integrity of the
SYS$COMMON:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT file and
make the necessary file name corrections. The files
corrected are as follows:
Incorrect lines
----------------
[SYSEXE]APB.EXE VMS721_SYS-V1200 (new)
[SYSEXE]DEBUG_APB.EXE VMS721_SYS-V1200 (new)
[SYSLIB]STARLET.MLB VMS721_AMACRO-V0100 (new)
[SYSLIB]SYS$ICBM.EXE VMS721_DRIVER-V0200
[SYSLIB]SMI$SHR.EXE VMS721_MANAGE-V0100
[SYS$LDR]SYS$GFDRIVER.EXE _OLD VMS721H1_VX1-V0200
[SYSEXE]SYS$CONFIG.DAT_0LD VMS721H1_VX1-V0200
[SYSLIB]DECC$SHR_OLD VMS721H1_ACRTL-V0200
[SYS$LDR]SYS$CPU_ROUTINES_2308.EXE VMS721H1_CPU2308-V0100
[SYSEXE]SYS$SMHANDLER_SLAVE_2308.EXE VMS721H1_CPU2308-V0100
Corrected Lines
----------------
[SYSEXE]APB.EXE_OLD VMS721_SYS-V1200 (new)
[SYSEXE]DEBUG_APB.EXE_OLD VMS721_SYS-V1200 (new)
[SYSLIB]STARLET.MLB_OLD VMS721_AMACRO-V0100 (new)
[SYSLIB]SYS$ICBM.EXE_0LD VMS721_DRIVER-V0200
[SYSLIB]SMI$SHR.EXE_0LD VMS721_MANAGE-V0100
[SYS$LDR]SYS$GFDRIVER.EXE_OLD VMS721H1_VX1-V0200
[SYSEXE]SYS$CONFIG.DAT_OLD VMS721H1_VX1-V0200
[SYSLIB]DECC$SHR.EXE_OLD VMS721H1_ACRTL-V0200
[SYS$LDR]SYS$CPU_ROUTINES_2308.EXE_OLD VMS721H1_CPU2308-V0100
[SYSEXE]SYS$SMHANDLER_SLAVE_2308.EXE_OLD VMS721H1_CPU2308-V0100
Corrections Explained
---------------------
[SYSEXE]APB.EXE_OLD Add _OLD to name (new)
[SYSEXE]DEBUG_APB.EXE_OLD Add _OLD to name (new)
[SYSLIB]STARLET.MLB_OLD Add _OLD to name (new)
[SYSLIB]SYS$ICBM.EXE_OLD Add _OLD to name
[SYSLIB]SMI$SHR.EXE_OLD Add _OLD to name
[SYS$LDR]SYS$GFDRIVER.EXE_OLD Delete a space
[SYSEXE]SYS$CONFIG.DAT_OLD Change 0 (zero) to O
[SYSLIB]DECC$SHR.EXE_OLD Add .EXE in name
[SYS$LDR]SYS$CPU_ROUTINES_2308.EXE_OLD Add _OLD to name
[SYSEXE]SYS$SMHANDLER_SLAVE_2308.EXE_OLD Add _OLD to name
In the event this kit fails to execute, the renaming of
the problem files can be done manually by performing the
following steps:
1. Edit the file
SYS$COMMON:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT.
Change the incorrect lines with the corrected lines
(as shown in the previous tables). Note that the
lines may appear within the file in any order, not
necessarily in the order of these tables.
2. Close SYS$COMMON:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT
file.
3. Purge the previous version of the file.
You will be able to install the OpenVMS Version 7.3
Operating System kit using the documented installation
instructions.
It is recommended that this kit be installed as the last
kit prior to the OpenVMS Version 7.3 Operating System
upgrade. This will assure that all problem files have
been updated.
Images Affected:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT
PROBLEMS ADDRESSED IN VMS721_RENAME_OLD-V0100 KIT
o During an OpenVMS ECO kit installation, names of the
installed images are written to
SYS$COMMON:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT. Several
of these file names were written incorrectly by the
following remedial kits.
o DEC-AXPVMS-VMS721_DRIVER-V0200-4.PCSI
o DEC-AXPVMS-VMS721_MANAGE-V0100-4.PCSI
o DEC-AXPVMS-VMS721_VX1-V0200-4.PCSI
o DEC-AXPVMS-VMS721H1_CPU2308-V0100-4.PCSI
o DEC-AXPVMS-VMS721H1_ACRTL-V0200-4.PCSI
During an OpenVMS Version 7.3 upgrade, operating system
files from the previous version of OpenVMS are deleted.
Because of these file errors, files from the newly
installed system may be deleted. This may cause the
system to become un-bootable.
This kit will verify the integrity of the
SYS$COMMON:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT file and
make the necessary file name corrections. The files
corrected are as follows:
Incorrect lines
----------------
[SYSLIB]SYS$ICBM.EXE VMS721_DRIVER-V0200
[SYSLIB]SMI$SHR.EXE VMS721_MANAGE-V0100
[SYS$LDR]SYS$GFDRIVER.EXE _OLD VMS721_VX1-V0200
[SYSEXE]SYS$CONFIG.DAT_0LD VMS721_VX1-V0200
[SYSLIB]DECC$SHR_OLD VMS721H1_ACRTL-V0200
[SYS$LDR]SYS$CPU_ROUTINES_2308.EXE VMS721H1_CPU2308-V0100
[SYSEXE]SYS$SMHANDLER_SLAVE_2308.EXE VMS721H1_CPU2308-V0100
Corrected Lines
----------------
[SYSLIB]SYS$ICBM.EXE_0LD VMS721_DRIVER-V0200
[SYSLIB]SMI$SHR.EXE_0LD VMS721_MANAGE-V0100
[SYS$LDR]SYS$GFDRIVER.EXE_OLD VMS721_VX1-V0200
[SYSEXE]SYS$CONFIG.DAT_OLD VMS721_VX1-V0200
[SYSLIB]DECC$SHR.EXE_OLD VMS721H1_ACRTL-V0200
[SYS$LDR]SYS$CPU_ROUTINES_2308.EXE_OLD VMS721H1_CPU2308-V0100
[SYSEXE]SYS$SMHANDLER_SLAVE_2308.EXE_OLD VMS721H1_CPU2308-V0100
Corrections Explained
---------------------
[SYSLIB]SYS$ICBM.EXE_OLD Add _OLD to name
[SYSLIB]SMI$SHR.EXE_OLD Add _OLD to name
[SYS$LDR]SYS$GFDRIVER.EXE_OLD Delete a space
[SYSEXE]SYS$CONFIG.DAT_OLD Change 0 (zero) to O
[SYSLIB]DECC$SHR.EXE_OLD Add .EXE in name
[SYS$LDR]SYS$CPU_ROUTINES_2308.EXE_OLD Add _OLD to name
[SYSEXE]SYS$SMHANDLER_SLAVE_2308.EXE_OLD Add _OLD to name
In the event this kit fails to execute, the renaming of
the problem files can be done manually by performing the
following steps:
1. Edit the file
SYS$COMMON:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT.
Change the incorrect lines with the corrected lines
(as shown in the previous tables). Note that the
lines may appear within the file in any order, not
necessarily in the order of these tables.
2. Close SYS$COMMON:[SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT
file.
3. Purge the previous version of the file.
You will be able to install the OpenVMS Version 7.3
Operating System kit using the documented installation
instructions.
Images Affected: [SYSUPD]VMS$REMEDIAL_OLD_FILES.TXT
RELATED ARTICLES:
Detailed articles describing the problems listed above may exist in
the OPENVMS database. To view these articles, open the appropriate
product database and perform a query using either of the following
search strings: 'VMS721_RENAME_OLD-V0200' or 'VMS721_RENAME_OLD'.
ECO KIT ORDERING INSTRUCTIONS:
If after an evaluation you wish to obtain this kit, request it
electronically using the appropriate Advanced Electronic Services
(AES) Service Tool. If you are not familiar with how to request
kits electronically, open the DIA, WIS or DSNLINK database and
review the article entitled:
[AES] How To Electronically Request ECO Kits Using Service Tools
INSTALLATION NOTES:
No reboot is necessary after successful installation of the kit.
Install this kit with the POLYCENTER Software installation
utility by logging into the SYSTEM account, and typing the
following at the DCL prompt:
PRODUCT INSTALL VMS721_RENAME_OLD /SOURCE=[location of Kit]
The saveset location may be a tape drive, CD, or a disk
directory that contains the kit saveset.
|
