Updated: 24-SEP-2003 (Use your browsers' Reload button to ensure you're viewing the most recent version)
VMS73_DELETE-V0100 Delete (Alpha V7.3) ECO Summary
Copyright (c) Compaq Computer Corporation 2002. All rights reserved.
New Kit Date: 12-JUN-2002
Modification Date: Not Applicable
Modification Type: NEW KIT
OP/SYS: OpenVMS Alpha V7.3
COMPONENT: System
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: VMS73_DELETE-V0100
DEC-AXPVMS-VMS73_DELETE-V0100--4.PCSI
ECO Kits Superseded by This ECO Kit: None
ECO Kit Approximate Size: 144 Blocks
Kit Applies To: OpenVMS Alpha V7.3
System/Cluster Reboot Necessary: No
Rolling Re-boot Supported: Information Not Available
Installation Rating: INSTALL_3
3 - To be installed on all systems running
the listed versions of OpenVMS which
are experiencing the problems described.
Kit Dependencies:
The following remedial kit(s), or later, must be installed BEFORE
installation of this, or any required kit:
VMS73_UPDATE-V0100
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for System Components on OpenVMS Alpha V7.3. This
kit addresses the following problems:
PROBLEMS ADDRESSED IN VMS73_DELETE-V0100 KIT:
o A PURGE/LOG <node>::[...]*.* command results in a
SYSTEM-F-ACCVIO.
SYSTEM-F-ACCVIO, Access violation, Reason mask=00,
virtual address=00000000304c4154, PC=FFFFFFFF804C1CDC,
PS=0000001B
Images Affected: [SYSEXE]DELETE.EXE
RELATED ARTICLES:
Detailed articles describing the problems listed above may exist in
the OPENVMS and STORAGE databases.To view these articles,open the
appropriate product database and perform a query using either
of the following search strings: 'VMS73_DELETE-V0100' or
'VMS73_DELETE'.
ECO KIT ORDERING INSTRUCTIONS:
If after an evaluation you wish to obtain this kit, request it
electronically using the appropriate Advanced Electronic Services
(AES) Service Tool. If you are not familiar with how to request
kits electronically, open the DIA, WIS or DSNLINK database and
review the article entitled:
[AES] How To Electronically Request ECO Kits Using Service Tools
INSTALLATION NOTES:
No reboot is necessary after successful installation of the kit.
INSTALLATION INSTRUCTIONS:
Install this kit with the {Installation Utility} utility by logging
into the SYSTEM account, and typing the following at the DCL
prompt:
PRODUCT INSTALL VMS73_DELETE /SOURCE=[location of Kit]
The kit location may be a tape drive, CD, or a disk directory that
contains the kit.
Additional help on installing PCSI kits can be found by typing
HELP PRODUCT INSTALL at the system prompt
SPECIAL INSTALLATION INSTRUCTIONS:
o Scripting of Answers to Installation Questions
During installation, this kit will ask and require user
response to several questions. If you wish to automate the
installation of this kit and avoid having to provide responses
to these questions, you must create a DCL command procedure
that includes the following definitions and commands:
- $ DEFINE/SYS NO_ASK$BACKUP TRUE
- Add the following qualifiers to the PRODUCT INSTALL
command and add that command to the DCL procedure.
/PROD=DEC/BASE=AXPVMS/VER=V1.0
- De-assign the logicals assigned
For example, a sample command file to install the
VMS73_DELETE-V0100 kit would be:
$
$ DEFINE/SYS NO_ASK$BACKUP TRUE
$!
$ PROD INSTALL VMS73_DELETE/PROD=DEC/BASE=AXPVMS/VER=V1.0
$!
$ DEASSIGN/SYS NO_ASK$BACKUP
$!
$ exit
All trademarks are the property of their respective owners.
==========================================================================
| Table of Kit Image Information |
+----------------------------+----------+-----------------+--------------+
| | Overall | Image File | Image Link |
| Image Name | Checksum | Identification | Date/Time |
+----------------------------+----------+-----------------+--------------+
| DELETE.EXE | 881A7F65 | X-05 | 16-OCT-2001 |
| | | 01:54:28.08 |
+----------------------------+----------+-----------------+--------------+
|
