Australia - Updated: 24-SEP-2003
hp.com home products and services support and drivers solutions how to buy
» contact hp
hp.com home hp OpenVMS ECOs

IMPORTANT NOTICE

The online distribution of OpenVMS and related product patches is being migrated to the HP ITRC (Information Technology Resource Center) patch distribution site. The new ITRC patch server will allow OpenVMS customers to take advantage of many enhanced features for patch searching and distribution.

Beginning August 1, 2003, OpenVMS and related Layered Product, publicly available patches will be available from the HP ITRC web site at

http://itrc.hp.com/service/patch/mainPage.do

The same patches will still be available from the existing patch server in Colorado Springs (http://www.support.compaq.com/patches/) through the end of October 2003, to give customers sufficient time to update their bookmarks and make the transition to the HP ITRC web site.

ECO kits will also be available by raw FTP from (ftp://ftp.itrc.hp.com/).

PLEASE UPDATE YOUR BOOKMARKS AND REGISTER ON THE NEW SITE NOW

Note: if you're having trouble connecting to the ITRC site, please delete any cookies for "itrc.hp.com" from your browser and try again. Report any difficulties with or suggestions to MrVMS

» Sydney CSC home page

Navigation
» ECOinfo main index
» Search ECOs
» Search FTP site
» Browse FTP site

ECO Indexes
» Chronological Index
» Indexed by Version
» Indexed by Rating
» Alpha Indexed by Name
» VAX Indexed by Name
» On Hold List

Associated Links
» OpenVMS Home Page
» OpenVMS News
» DIA/WIS Web Service

Feedback
» mail to CSC
.
Sydney Customer Support Centre OpenVMS ECO information
    Updated: 24-SEP-2003 (Use your browsers' Reload button to ensure you're viewing the most recent version)

VAXCLD01_071 VAX V7.1 Analyze ECO Summary

To obtain this kit please call the Customer Support Centre or use the FTP site

Search for this ECO kit and dependencies
Search the Compaq FTP web site this kit (exact match)
Search the Compaq FTP web site this or related ECOs

    
    
    Copyright (c) Digital Equipment Corporation 1998.  All rights reserved.
    
    OP/SYS:     DIGITAL OpenVMS VAX
    
    COMPONENT:  ANALYZE.CLD
    
    SOURCE:     Digital Equipment Corporation
    
    ECO INFORMATION:
    
         ECO Kit Name:  VAXCLD01_071
         ECO Kits Superseded by This ECO Kit:  None
         ECO Kit Approximate Size:  126 Blocks
         Kit Applies To:  OpenVMS VAX V7.1
         System/Cluster Reboot Necessary:  No
    
         Installation Rating:  3 - To be installed on all systems running
                                   the listed versions of OpenVMS which
                                   are experiencing the problems described.
    
         NOTE:  In order to receive the full fixes listed in this kit,
                the following remedial kits also need to be installed:
    
                     None
    
    
    ECO KIT SUMMARY:
    
    An ECO kit exists for ANALYZE.CLD on OpenVMS VAX V7.1.  This kit
    addresses the following problems:
    
      o  The command ANAL/AUDIT/SELECT=(PRIVILEGES_USED=OPER) fails
         with a syntax error on 'IMPERSONATE'.
    
    
    RELATED ARTICLES:
    
    Detailed articles describing the problems listed above may exist in
    the OPENVMS database.  To view these articles, open the appropriate
    product database and perform a query using either of the following
    search strings: 'VAXCLD01_071' or 'VAXCLD'.
    
    
    ECO KIT ORDERING INSTRUCTIONS:
    
    If after an evaluation you wish to obtain this kit, request it
    electronically using the appropriate Advanced Electronic Services
    (AES) Service Tool.  If you are not familiar with how to request
    kits electronically, open the DIA, WIS or DSNLINK database and
    review the article entitled:
    
         [AES] How To Electronically Request ECO Kits Using Service Tools
    
    
    INSTALLATION NOTES:
    
    The system does not need to be rebooted after this ECO kit is
    installed.  However, the following commands should be executed
    in order for all kit changes to take effect.
    
      o  Issue the command:
    
           SET COMMAND SYS$UPDATE:ANALYZE.CLD
    
      o  To make the change permanent for the entire system issue the
         command:
    
           SET COMMAND/TABLE=SYS$LIBRARY:DCLTABLES/ -
           OUTPUT=SYS$LIBRARY:DCLTABLES SYS$UPDATE:ANALYZE
    
privacy statement using this site means you accept its terms feedback to the webmaster
VMS rules VMS rocks OpenVMS rules OpenVMS rocks