Updated: 24-SEP-2003 (Use your browsers' Reload button to ensure you're viewing the most recent version)
VMS721H1_RTPAD-V0100 Alpha V7.2-1H1 RTPAD ECO Summary
Copyright (c) Compaq Computer Corporation 2002. All rights reserved.
Modification Date: 09-APR-2002
Modification Date: Not Applicable
Modification Type: NEW KIT
OP/SYS: OpenVMS Alpha
COMPONENT: RTPAD
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: VMS721H1_RTPAD-V0100
DEC-AXPVMS-VMS721H1_RTPAD-V0100--4.PCSI
ECO Kits Superseded by This ECO Kit: None
ECO Kit Approximate Size: 304 Blocks
Kit Applies To: OpenVMS Alpha V7.2-1H1
System/Cluster Reboot Necessary: No
Rolling Re-boot Supported: Information NA
Installation Rating: INSTALL_3
3 : To be installed by customers experiencing
the problems corrected.
Kit Dependencies:
The following remedial kit(s),or later, must be installed BEFORE
installation of this, or any required kit:
VMS721H1_UPDATE-V0400
In order to receive all the corrections listed in this
kit, the following remedial kits, or later, should also be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for RTPAD on OpenVMs Alpha V7.2-1H1.
This kit addresses the following problems.
PROBLEMS ADDRESSED IN VMS721H1_RTPAD-V0100:
o When running RTPAD, a process can hang in LEF state.
Images Affected: [SYSEXE]RTPAD.EXE
RELATED ARTICLES:
Detailed articles describing the problems listed above may exist in
the OPENVMS database(s). To view these articles,
open the appropriate product database and perform a query using either
of the following search strings: 'VMS721H1_RTPAD-V0100' or
'VMS721H1_RTPAD'.
ECO KIT ORDERING INSTRUCTIONS:
If after an evaluation you wish to obtain this kit, request it
electronically using the appropriate Advanced Electronic Services
(AES) Service Tool. If you are not familiar with how to request
kits electronically, open the DIA, WIS or DSNLINK database and
review the article entitled:
[AES] How To Electronically Request ECO Kits Using Service Tools
INSTALLATION NOTES:
No reboot is necessary after successful installation of the kit.
INSTALLATION INSTRUCTIONS:
Install this kit with the POLYCENTER Software installation utility
by logging into the SYSTEM account, and typing the following at the
DCL prompt:
PRODUCT INSTALL VMS721H1_RTPAD /SOURCE=[location of Kit]
The kit location may be a tape drive, CD, or a disk directory that
contains the kit.
Additional help on installing PCSI kits can be found by typing
HELP PRODUCT INSTALL at the system prompt
SPECIAL INSTALLATION INSTRUCTIONS:
o Scripting of Answers to Installation Questions
During installation, this kit will ask and require user
response to several questions. If you wish to automate the
installation of this kit and avoid having to provide responses
to these questions, you must create a DCL command procedure
that includes the following definitions and commands:
- $ DEFINE/SYS NO_ASK$BACKUP TRUE
- $ DEFINE/SYS NO_ASK$REBOOT TRUE
- Add the following qualifiers to the PRODUCT INSTALL
command and add that command to the DCL procedure.
/PROD=DEC/BASE=AXPVMS/VER=V1.0
- De-assign the logicals assigned
For example, a sample command file to install the
VMS721H1_RTPAD-V0100 kit would be:
$
$ DEFINE/SYS NO_ASK$BACKUP TRUE
$ DEFINE/SYS NO_ASK$REBOOT TRUE
$!
$ PROD INSTALL VMS721H1_RTPAD/PROD=DEC/BASE=AXPVMS/VER=V1.0
$!
$ DEASSIGN/SYS NO_ASK$BACKUP
$ DEASSIGN/SYS NO_ASK$REBOOT
$!
$ exit
All trademarks are the property of their respective owners.
==========================================================================
| Table of Kit Image Information |
+----------------------------+----------+-----------------+--------------+
| | Overall | Image File | Image Link |
| Image Name | Checksum | Identification | Date/Time |
+----------------------------+----------+-----------------+--------------+
| RTPAD.EXE | 3FB48551 | X-9 | 15-JAN-2002 |
| | | 15:15:41.41 |
+----------------------------+----------+-----------------+--------------+
|