Updated: 24-SEP-2003 (Use your browsers' Reload button to ensure you're viewing the most recent version)
VAXCLIU03_060 (VAX V6.0 SET/SHOW) ECO Summary
Copyright (c) Digital Equipment Corporation 1994, 1997. All rights reserved.
PRODUCT: OpenVMS VAX
COMPONENTS: CLIUTL - SET.EXE
SHOW.EXE
SOURCE: Digital Equipment Corporation
ECO INFORMATION:
ECO Kit Name: VAXCLIU03_060
ECO Kits Superseded by This ECO Kit: VAXCLIU02_070 (V6.0 Only)
VAXCLIU01_062 (V6.0 Only)
VAXCLIU02_060
VAXCLIU01_060
ECO Kit Approximate Size: 695 Blocks
Kit Applies To: OpenVMS VAX V6.0
System/Cluster Reboot Necessary: No
Installation Rating: 3 - To be installed on all systems running
the listed versions of OpenVMS which
are experiencing the problems described.
NOTE: In order to receive the full fixes listed in this kit,
the following remedial kits also need to be installed:
VAXVERI01_071 for OpenVMS VAX V6.0 only
ECO KIT SUMMARY:
An ECO kit exists for the DCL commands 'SET' and 'SHOW' on OpenVMS VAX
V6.0. This kit addresses the following problems:
Problems Addressed in the VAXCLIU03_060 Kit:
o These OpenVMS VAX V6.0 problem corrections were included in the
multi-version VAXCLIU02_070 remedial kit. They are now being issued
as a V6.0 only remedial kit.
There are no new problem corrections in this remedial kit.
Problems Addressed in the VAXCLIU01_062 Kit for OpenVMS VAX V6.0:
o The index file of a disk can become corrupted. Closer examination
of the index file will show that a large number of blocks in the
index file, at contiguous VBNs from the start of the file, will have
two words corrupted in the file at offsets 0x3a and 0x1FE. These
correspond to the locations of checksum1 and checksum2 in a volume
home block (homeblock).
NOTE: In order to receive this full fix, the VAXVERI01_071 ECO kit
must also be installed on your system.
Problems Addressed in the VAXCLIU02_060 Kit:
o If a user with OPER privileges issues either one of the following
DCL commands, the system will crash with a fatal bugcheck:
SET TERMINAL/PROTOCOL=NONE RTA0
or
SET TERMINAL/PROTOCOL=DDCMP RTA0
This problem is fixed in OpenVMS VAX V6.1.
Problems Addressed in the VAXCLIU01_060 Kit:
o The VT510 terminal is not correctly identified as a member of the
VT500 series of terminals.
RELATED ARTICLES:
Detailed articles describing the problems listed above may exist in the
OPENVMS database. To view these articles, open the appropriate product
database and perform a query using either of the following search
strings: 'VAXCLIU03_060' or 'VAXCLIU'.
ECO KIT ORDERING INSTRUCTIONS:
If after an evaluation you wish to obtain this kit, request it
electronically using the appropriate Advanced Electronic Services
(AES) Service Tool. If you are not familiar with how to request
kits electronically, open the DIA, WIS or DSNLINK database and
review the article entitled:
[AES] How To Electronically Request ECO Kits Using Service Tools
INSTALLATION NOTES:
The system does not need to be rebooted after this kit is installed.
However, if you have other nodes in your OpenVMS VMScluster, they should
be rebooted or you should install this kit on each system in order to
make use of the new image(s).
==========================================================================
| Table of Kit Image Information |
+----------------------------+----------+-----------------+--------------+
| | Overall | Image File | Image Link |
| Image Name | Checksum | Identification | Date/Time |
+----------------------------+----------+-----------------+--------------+
| SET.EXE |%X3900EAA2| X-2 | 20-JUN-1995 |
| | | 02:58:07.90 |
+----------------------------+----------+-----------------+--------------+
| SHOW.EXE |%X146DCDDC| X-1 | 5-NOV-1993 |
| | | 15:36:32.74 |
+----------------------------+----------+-----------------+--------------+
|
