Updated: 24-SEP-2003 (Use your browsers' Reload button to ensure you're viewing the most recent version)
VAXDRIV05_070 VAX V7.0 DUDRIVER ECO Summary
Copyright (c) Digital Equipment Corporation 1997. All rights reserved.
OP/SYS: OpenVMS VAX
COMPONENT: DUDRIVER
SOURCE: Digital Equipment Corporation
ECO INFORMATION:
ECO Kit Name: VAXDRIV05_070
ECO Kits Superseded by This ECO Kit: VAXDRIV04_070 (Supersedes the
OpenVMS VAX V7.0 section
of this kit *ONLY*)
VAXDRIV03_070
VAXDRIV02_070
VAXDRIV01_070
ECO Kit Approximate Size: 126 Blocks
Kit Applies To: OpenVMS VAX V7.0
System/Cluster Reboot Necessary: Yes
Installation Rating: 3 - To be installed on all systems running
the listed versions of OpenVMS which
are experiencing the problems described.
NOTE: In order to receive the full fixes listed in this kit,
the following remedial kits also need to be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for DUDRIVER on OpenVMS VAX V7.0. This kit
addresses the following problems:
Problems addressed in the VAXDRIV05_070 Kit:
o These OpenVMS VAX 7.0 problem corrections were included in
the multi-version VAXDRIV04_070 remedial kit. They are now
being issued as a V7.0 only remedial kit.
There are no new problem corrections in this remedial kit.
Problems addressed in the VAXDRIV04_070 Kit:
o A PGFLIPLHI system crash may occur when the controller is rebooted.
o A problem exists with HSJ/HSD30, 40 and 50 controllers where,
after an event that initiates Mount Verification, a packet
acknowledgment will fail to complete. The controller will
report that it is making progress on the command, but will
never finish. This causes all IO to the affected devices to
hang.
Problems addressed in the VAXDRIV03_070 Kit:
o The system will get repetitive Volume Processing Messages on
Host Based Volume Shadowing Disks. The CDDB$W_RSTRTCNT field
of the member devices will be incrementing as seen in the
Reinit Count field under SDA.
Problems addressed in the VAXDRIV02_070 Kit:
o A shadow set can be successfully mounted on a client. When
a mount of the same shadow set is tried on a local (server)
node, it fails.
o A node may hang due to no quorum after losing its connection
to the quorum disk.
o DUDRIVER does not log IRP information.
Problems addressed in VAXDRIV01_070:
o Static load balancing does not work as it designed to.
o System crashes occur in DUDRIVER, usually at FUNCTION_EXIT:.
However, the crashes may also occur in other places.
o The errorlog does not contain any information on the actual
outstanding command that has timed out from a Get Command
Status (GCS) query issued from DUDRIVER to the MSCP Server.
o Host Based Shadowset Virtual Units hang in Mount Verification.
All IO to the device is stalled.
RELATED ARTICLES:
Detailed articles describing the problems listed above may exist in
the STORAGE and OPENVMS databases. To view these articles, open
the appropriate product database and perform a query using either of
the following search strings: 'VAXDRIV05_070,' 'VAXDRIV' or
'VAXSHAD'.
ECO KIT ORDERING INSTRUCTIONS:
If after an evaluation you wish to obtain this kit, request it
electronically using the appropriate Advanced Electronic Services
(AES) Service Tool. If you are not familiar with how to request
kits electronically, open the DIA, WIS or DSNLINK database and
review the article entitled:
[AES] How To Electronically Request ECO Kits Using Service Tools
INSTALLATION NOTES:
In order for the corrections in this kit to take effect, the system
must be rebooted. If the system is a member of a VMScluster, the
entire cluster should be rebooted.
==========================================================================
| Table of Kit Image Information |
+----------------------------+----------+-----------------+--------------+
| | Overall | Image File | Image Link |
| Image Name | Checksum | Identification | Date/Time |
+----------------------------+----------+-----------------+--------------+
| DUDRIVER.EXE |%X79F7E71D| X-79A3 | 31-OCT-1996 |
| | | 10:40:35.98 |
+----------------------------+----------+-----------------+--------------+
|
